SIPware IP

SIPware™ IP products and solutions include embedded processors, wired interfaces, bus fabrics, peripheral controllers, and cores for automotive, consumer and IoT/sensor applications. Samsung Foundry design IP is now licensed and supported by Silvaco. This catalog of IP meets the requirements for different consumer, mobile, and HPC applications including wired and high-speed interfaces, analog and mixed-signal blocks and advanced security hard/soft cores.

Contact IP@Silvaco.com if you do not see the SIPware product you require.


SIPware Interface PHYs

Silvaco SIPware offers production-proven high-speed interface IP solutions for Samsung Foundry.

Protocol Features
Samsung Foundry
28nm
FD-SOI
14 nm
11 nm
10 nm
8 nm
PCIe PCIe Gen 3, 8 Gbps
PDF
PCIe Gen 3/4, 16 Gbps
DDR DDR3/4, 3.2 Gbps, 32/64-bit
LPDDR3/4, 4.3 Gbps, 16/32-bit
DDR/LPDDR3 Combo, 1.6 Gbps, 32-bit
PDF
LPDDR4/4X, 4.3 Gbps, 16/32-bit
PDF
LPDDR4/5, 5.5 Gbps, 16-bit
GDDR6, Max 20 Gbps
MIPI M-PHY G3, 6.0 Gbps (UFS only)
PDF
M-PHY G4, 12.0 Gbps (UFS only)
D-PHY V1.2, 2.1 Gbps
PDF
C-PHY D-PHY Combo V1.1 (2.5 Gbps) / V2.0 (4.5 Gbps)
Ethernet SerDes 56 Gbps, 10/50G-KR, 100G-KR2/4, 200G-KR4
HDMI HDMI 2.0 Tx, 6.0 Gbps
PDF
HDMI / DisplayPort Combo HDMI 2.1 Tx / DP 1.4 Tx Combo, 12 Gbps / 8.1 Gbps
USB / DisplayPort Combo USB 3.1 Gen 1 / DP 1.4 Tx Combo, 5 Gbps / 5.4 Gbps
V-by-One Tx, 4 Gbps, 16 lanes
PDF
Rx, 4 Gbps, 8 lanes
PDF
WiFi IEEE 802.11ax 6x6 MIMO WiFi transceiver Analog Front-End (AFE)

SIPware Interface Controllers

Silvaco SIPware offers a production-proven suite of wired interface IP for MIPI and USB protocols.

  Protocol Features
MIPI MIPI I3C I3C V1.01, APB 3.0, SDR, DDR, IBI
IEEE 1149.7 TAP IEEE STD 1149.7 - 2009, JTAG ( IEEE 1149.1 ), 2-pin access, Reduced scan time
IEEE 1149.7 DTS Adapter IEEE STD 1149.7 - 2009, JTAG ( IEEE 1149.1 ), Scan formats, Scan topologies
USB USB 2.0 HS, Host USB 2.0, OHCI compliant, DMA, Bulk/Interrupt/Isochronous endpoints
USB 2.0 FS, Host USB 2.0, OHCI compliant, DMA, Bulk/Interrupt/Isochronous endpoints
USB 2.0 HS, Device USB 2.0, DMA, Bulk/Interrupt/Isochronous endpoints
USB 2.0 FS, Device USB 2.0, DMA, Bulk/Interrupt/Isochronous endpoints

SIPware Automotive Controllers

Silvaco SIPware offers a suite of production proven controllers for automotive network applications including FlexCAN with CAN-FD, FlexRay and LINFlexD.

Protocol Features
LINFlexD LIN 1.3, 2.0, 2.1 and 2.2, AMBA APB
FlexCAN CAN 2.0B, Full-CAN with CAN-FD, AMBA APB
MultiCAN CAN 2.0B, Full-CAN, Twin CAN, TTCAN, AMBA APB
CAN Controller CAN 2.0B, Full-CAN, AMBA APB
FlexRay FlexRay 2.1, AMBA AHB

SIPware AMBA IP Cores and Subsystems

Silvaco’s SIPware offers production proven AMBA IP cores and subsystems.

  Title Features
AMBA Bus Fabric / Bridges AHB / AXI Multi Fabric AXI 4, Support up to 4 masters and 8 slaves
AHB / AXI Bridge AXI 4, AHB Lite, 2-clock domains with FIFO support
AHB / APB Bridge APB 3.0, 2.0, Low latency, Low gate count
AHB / APB Bus Channel Decoder APB 3.0, 2.0, Support up to 16 slaves
AXI AXI External Memory Controller AXI-4, AHB, 8/16/32 and 64-bit external modes up to 4 external devices
AXI QSPI Controller AXI-4, XIP support, DMA, Quad/Dual mode, Full/half duplex operation
AXI / SPI Slave Bridge Read / Write Access to AXI subsystem registers & memories
AHB AHB Octal / Quad SPI Controller AHB, 4/8/32-bit operation, Full/half duplex, Dual/quad modes
AHB Arbiter AHB 2.0, Up to 4 masters using round-robin mechanism
AHB DES / Triple DES AHB 2.0, AHB DES/TDES mode, DMA master, Elliptical curve
AHB DMA Controller AHB 2.0, 1/4-channel, Single/programmable burst, Linked-list support
APB APB UART APB 2.0, Programmable baud rates, DMA interface, Interrupt support
APB GPIO APB 2.0, Scalable up to 32 I/Os, Interrupt support, Software configurable
APB Real Time Clock APB 2.0, Clock/calendar BCD format with interrupt support
APB Interrupt Controller APB 2.0, Up to 32 independent channels
APB Pulse Width Modulator APB 2.0, Prescalar/non-prescalar mode, 4-bit prescalar
APB Single / Quad Timer APB 2.0, 16-bit counter/timer, 10-bit prescaler, RTOS time base
APB Watchdog Timer APB 2.0, 16-bit R/W bus, 10-bit address bus, Interrupt support, DFT signals
APB I2S Audio APB 2.0, 32-bit R/W 10-bit address bus, DMA interface
AMBA Subsystems I3C Sensor APB MIPI I3C, APB 3.0 backward compatible, SDR/DDR mode, IBI (In Band Interrupt)
AHB Low-power AHB 2.0, APB 3.0, Power management, Boot code, Basic kernel support
AHB Performance ARM-M0 / ARM-M3 AHB 2.0, APB 3.0, PMU, RTOS/Kernel support, DMA
AXI Performance AXI 4.0, AHB 2.0, APB 3.0 Multi-layer Fabric, QSPI RTOS/Linux support

SIPware Security Cores

Silvaco SIPware Security IP targets a wide-range of Mobile, IoT and Automotive SoC devices. It supplements the primary system processor with a full array of security services, such as secure boot and runtime integrity checking, remote authentication and attestation, and hardware acceleration for symmetric and asymmetric cryptographic algorithms.

  Features
Samsung Foundry
28nm
FD-SOI
14 nm
11 nm
10 nm
8 nm
Encrypt / Decrypt / Cipher Engines Samsung True Random Number Generator (TRNG), 0.5 Mbps Throughput
Samsung PUF (Physical Unclonable Function), 1 Kbps PUF response, Hard macro
IoT includes Security Processor (CM0+), ROM, RAM, all Crypto engines RTL
Mobile includes Security Processor (CM0+), ROM, RAM, DMA, all Crypto engines
ADAS includes Security Processor (CM7), ROM, RAM, DMA, Safety, all Crypto engines
SecureAES with Side Channel Attack Countermeasure
AES (Advanced Encryption Standard) - FIPS-197 compliant, AHB slave interface
Combined Hash (SHA1/2/3) with HMAC (Hash Message Authentication Code)
RSA/ECC/SM2 Accelerator (Public Key Engine)
DRAM Protection, Secure iRAM Extender (SIREX)
Anti-Intrusion Detector (Runtime Integrity Checker)
ECDSA(Elliptic Curve Digital Signature Algorithm)-based SecureJTAG

SIPware Analog Cores

Silvaco offers a suite of high-performance and low-power analog IP solutions for Samsung Foundry.

  Features
Samsung Foundry
28nm
FD-SOI
14 nm
11 nm
10 nm
8 nm
Integer
PLL
1.2 GHz
PDF
2.0 GHz
PDF
2.4 GHz
2.5 GHz
3.2 GHz
PDF
4.3 GHz
PDF
4.5 GHz
Fractional-N SSC
PLL
1.2 GHz
PDF
2.5 GHz
3.2 GHz
PDF
4.5 GHz
Low Jitter
PLL
100 MHz
PDF
640 MHz
PDF
ADC 12 bit, 1.0 MSPS, 16-ch
PDF
12 bit, 61.44 MSPS
12 bit, 320 MSPS
PDF
DAC 12 bit, 640 MSPS
PDF
Oscillators 1.0 MHz
PDF
49.152 MHz
PDF
Regulators 3.3V to 1.8V 350mA
1.8V to 0.8V 100mA
PDF
1.8V to 1.2V 200mA / 500 mA
PDF
1.8V to 0.9V 45mA / 250 mA
PDF
1.8V to 0.75V 10mA LDO
1.35V to 0.85V 220mA LDO
1.2V to 0.8V 550mA
PDF
POR 0.75V Power On Reset
0.8V Power On Reset
PDF
1.0 V Power on Reset
ABBG Adaptive Body Bias Generator
Detectors IR Drop
PDF
Droop
Low Voltage, 1.8V / 3.3V
PDF
Temperature Sensors -40 to 125°C, Resolution: 0.0625°C
PDF
-40 to 125°C, Resolution: 1°C
PVT Sensors Process, Voltage and Temperature sensor. RVT (Regular Vt ) / LVT (Low Vt)
process sensor type, 0 to 1.3V, -40 to 125°C, Resolution: 0.0625°C
PDF

SIPware AFEs and Audio Codec

Silvaco SIPware provides audio and video IP for Samsung Foundry targeted to consumer, mobile, automotive and industrial applications.

  Features
Samsung Foundry
14 nm
11 nm
Audio Codecs 1.8V/0.8V 24-Bit 48KHz
PDF
Video Analog Front-Ends 1.8V/0.8V 10-bit 162 MSPS RGB AFE
PDF
1.8V/0.8V 12-bit 57.272 MSPS CVBS AFE
PDF
1.8V/0.8V 12-bit 61.44 MSPS Single Input (SIF) AFE
PDF

SIPware Embedded Processors and Platforms

Silvaco’s SIPware offers popular 32/6/8-bit embedded processors from tier1 semiconductor companies.

  CPU Core/Platform Features
ColdFire ColdFire V1 Processor ColdFire V1 core with EMAC, Divider and Cryptograhic unit
ColdFire V1 Processor Platform ColdFire V1 core with AMBA peripherals connected in a subsystem
ColdFire V2 Processor ColdFire V2 Core low-gate count, high performance ColdFire architecture
ColdFire V2SPPC1 ColdFire V2 Core with AMBA peripherals connected in a subsytem
ColdFire V2 SPP5208 Processor Platform ColdFire V2 Core with single Fast Ethernet and AMBA peripherals connected in a subsytem
ColdFire V4 Processor ColdFire V4 Core is a high-performance delivering 500 DMIPS of performance
ColdFire V4 SPPC1 Processor Platform ColdFire V4 Core AMBA peripherals connected in a subsytem
ColdFire V4 SPPC2 Processor Platform ColdFire V4 Core with dual Fast Ethernet and AMBA peripherals connected in a subsytem
PowerPC Power Architecture e200z1 Processor 32-bit Power Architecture ISA Version 2.03 with AMBA peripherals
Power Architecture e200z6 Processor Power Architecture ISA Single-issue, 32-bit Book E–compliant core with AMBA peripherals
16-bit Processor C166S Processor 16-bit C166S V1 Subsystem with standard peripherals from Infineon
CR16CP Processor 16-bit CompactRISC with AMBA subsystem from TI/National
8-bit Processor HCS08 Processor High performance, low power, 8-bit processor from NXP/Freescale
M8051EW High performance, 8-bit processor, low power in VHDL from Mentor Graphics